Are you tired of spending a fortune on tools that only get occasional use? If you’re like many people, you’ve probably found yourself in this situation before. Fortunately, with a little bit of ingenuity and some basic supplies, you can create your own homemade u joint tool that will save you both time and money.
What is a U Joint Tool?
Before we dive into the details of how to make your own u joint tool, let’s first define what it is. A u joint, also known as a universal joint, is an essential component of any vehicle’s drivetrain. It connects the transmission to the driveshaft and allows for smooth power transfer even when the two components are at different angles.
A u joint tool is used to remove and install these joints. It typically consists of two pieces that fit over the u joint and allow it to be pressed out or pressed back in.
Why Make Your Own?
While there are plenty of commercial u joint tools available for purchase, they can be expensive and may not always be readily available when you need them. By making your own tool, you can save money and have the satisfaction of knowing that you created something useful with your own hands.
How to Make Your Own Homemade U Joint Tool
Now that you understand why it’s worth making your own u joint tool, let’s get into the nitty-gritty of how to do it.
Materials:
– 2-inch PVC pipe
– Hacksaw
– Drill
– 1/2-inch drill bit
– Sandpaper
– Metal rod (3/8-inch diameter)
– Hammer
Instructions:
1. Cut a 2-inch length of PVC pipe using a hacksaw.
2. Sand down any rough edges so that the pipe is smooth.
3. Using a drill with a 1/2-inch drill bit, make a hole in the center of one end of the pipe. This will be where the metal rod is inserted.
4. Cut a 6-inch length of metal rod using a hacksaw.
5. Insert the metal rod into the PVC pipe so that it protrudes out of the end with the hole.
6. Using a hammer, tap on the exposed end of the metal rod until it is flush with the end of the PVC pipe.
7. Your homemade u joint tool is now ready to use!
Tips:
– If you find that your tool isn’t quite long enough to reach all parts of your u joint, simply attach an extension piece to the end of it using a coupler or another piece of PVC pipe.
– Be sure to sand down any rough edges on both the PVC pipe and metal rod before using your tool. This will prevent damage to your u joint and ensure that it functions properly.
Conclusion
By following these simple instructions, you can create your own homemade u joint tool that will serve you well for years to come. Not only will you save money by not having to purchase a commercial tool, but you’ll also have the satisfaction of knowing that you created something useful with your own two hands.
So why wait? Head to your local hardware store and gather up the supplies you need to make your own u joint tool today!
Wiki Reference: https://en.wikipedia.org/wiki/Universal_joint
